"The pump manufacturer reminds: 5 tips on how to quickly determine the quality of the pump."

2024-11-23

The car pump was originally developed as a tire pump with power from a car socket. However, with the growing popularity and expansion of application in the market, the products have undergone various improvements, such as battery pumps, pumps with automatic stop function when the set pressure is reached and two-cylinder high pressure pumps. These devices are suitable not only for tire pumping, but also for motorcycles, bicycles, sports balls and other standard products. But how to determine the quality of the pump when choosing it? The pump manufacturer recommends paying attention to the following aspects:

1. Continuous use time

Continuous use time, or device life, shows how many times a pump can pump air. Although the pump is often used as an emergency device and is not used as often, a standard device must withstand from 50 to 100 cycles. However, cheap counterparts on the market often do not meet these requirements. For example, I bought an inexpensive pump that stopped working after three uses. In addition, the pump speed did not meet the manufacturer's stated, and the process took too long.

2. Current stability

It is important to check how stable the current is during the operation of the device. The car pump is powered by a 12V power source in the car, and the standard current is usually less than 10 amps. If the current is unstable or exceeds 10A during the operation of the pump, this can cause the car fuse to burn out. In more serious cases, this can damage the car's power supply, which will negatively affect its operation. Similar problems often occur with cheap and poor-quality pumps.

3. Pumping speed

Pay attention to the inflating time. For example, it usually takes 3 to 10 minutes to fully inflate a standard 195 tire. Small pumps inflate in 7-10 minutes, standard pumps in 4-6 minutes, and direct high-pressure pumps in less than 4 minutes.

For passenger cars, a standard pump with a pumping time of 4-6 minutes is usually sufficient. If a standard pump inflates a tire in 10 minutes or more, this indicates poor product quality. Pumps with direct high-pressure drive are more often used for trucks and other heavy vehicles.

4. Product Materials

Pay attention to the materials from which the pump is made. The easiest way is to smell. If the product is made of high-quality primary materials, the smell of plastic will be minimal and will not be irritating. Such products, firstly, are more durable, and secondly, are safe for health.

If the product has a sharp and unpleasant odor, this indicates that a lot of recyclables are used in its composition. Such pumps are usually less durable and may contain toxic substances. This aspect is also important for assessing the quality of the product.

5. Can the pump fully inflate the tire

Check if the pump is able to fully inflate the car tire. For example, my friend bought an inexpensive pump on the Internet. When he tried to inflate the tire of his car, the pressure never reached the norm. A standard tire requires a pressure of 2.5 kg / cm², and his pump could only inflate up to 1.5 kg / cm².

When he complained to the seller, he said that he never mentioned that the pump is capable of reaching 2.5 kg / cm². As a result, this was an unpleasant surprise. Therefore, before buying, it is important to clarify the characteristics of the pump to avoid such situations.

In conclusion:

When buying a pump, it is important to exercise caution. There are many cheap products on the market that, in addition to being useless, can negatively affect the automotive electrical system. Use the above tips to avoid buying low-quality goods.

We, as one of the well-known manufacturers of pumps, pay special attention to the quality of our products:

  1. Quality materials. Only primary materials are used in production, which ensures durability, stability of operation and long time of use.

  2. own developments. All products are developed and designed by our company. We have our own patents and a full set of certificates, which indicates the high level of our competence in development.

  3. own production. Our factory is equipped with modern equipment and several semi-automatic production lines. Each product undergoes thorough testing before sending to customers. Thanks to this, we guarantee high quality and timely delivery of products.

We also cooperate with automakers both in the domestic and international markets, confirming the reliability of our products.

The car pump was originally developed as a tire pump with power from a car socket. However, with the growing popularity and expansion of application in the market, the products have undergone various improvements, such as battery pumps, pumps with automatic stop function when the set pressure is reached and two-cylinder high pressure pumps. These devices are suitable not only for tire pumping, but also for motorcycles, bicycles, sports balls and other standard products. But how to determine the quality of the pump when choosing it? The pump manufacturer recommends paying attention to the following aspects:

1. Continuous use time

Continuous use time, or device life, shows how many times a pump can pump air. Although the pump is often used as an emergency device and is not used as often, a standard device must withstand from 50 to 100 cycles. However, cheap counterparts on the market often do not meet these requirements. For example, I bought an inexpensive pump that stopped working after three uses. In addition, the pump speed did not meet the manufacturer's stated, and the process took too long.

2. Current stability

It is important to check how stable the current is during the operation of the device. The car pump is powered by a 12V power source in the car, and the standard current is usually less than 10 amps. If the current is unstable or exceeds 10A during the operation of the pump, this can cause the car fuse to burn out. In more serious cases, this can damage the car's power supply, which will negatively affect its operation. Similar problems often occur with cheap and poor-quality pumps.

3. Pumping speed

Pay attention to the inflating time. For example, it usually takes 3 to 10 minutes to fully inflate a standard 195 tire. Small pumps inflate in 7-10 minutes, standard pumps in 4-6 minutes, and direct high-pressure pumps in less than 4 minutes.

For passenger cars, a standard pump with a pumping time of 4-6 minutes is usually sufficient. If a standard pump inflates a tire in 10 minutes or more, this indicates poor product quality. Pumps with direct high-pressure drive are more often used for trucks and other heavy vehicles.

4. Product Materials

Pay attention to the materials from which the pump is made. The easiest way is to smell. If the product is made of high-quality primary materials, the smell of plastic will be minimal and will not be irritating. Such products, firstly, are more durable, and secondly, are safe for health.

If the product has a sharp and unpleasant odor, this indicates that a lot of recyclables are used in its composition. Such pumps are usually less durable and may contain toxic substances. This aspect is also important for assessing the quality of the product.

5. Can the pump fully inflate the tire

Check if the pump is able to fully inflate the car tire. For example, my friend bought an inexpensive pump on the Internet. When he tried to inflate the tire of his car, the pressure never reached the norm. A standard tire requires a pressure of 2.5 kg / cm², and his pump could only inflate up to 1.5 kg / cm².

When he complained to the seller, he said that he never mentioned that the pump is capable of reaching 2.5 kg / cm². As a result, this was an unpleasant surprise. Therefore, before buying, it is important to clarify the characteristics of the pump to avoid such situations.

In conclusion:

When buying a pump, it is important to exercise caution. There are many cheap products on the market that, in addition to being useless, can negatively affect the automotive electrical system. Use the above tips to avoid buying low-quality goods.

We, as one of the well-known manufacturers of pumps, pay special attention to the quality of our products:

  1. Quality materials. Only primary materials are used in production, which ensures durability, stability of operation and long time of use.

  2. own developments. All products are developed and designed by our company. We have our own patents and a full set of certificates, which indicates the high level of our competence in development.

  3. own production. Our factory is equipped with modern equipment and several semi-automatic production lines. Each product undergoes thorough testing before sending to customers. Thanks to this, we guarantee high quality and timely delivery of products.

We also cooperate with automakers both in the domestic and international markets, confirming the reliability of our products.